Which of the following terms identifies the wiring closet in the basement or a ground floor that typically includes the demarcation point quizlet?
The main distribution frame (MDF) is the main wiring point for a building. The MDF is typically located on the bottom floor or basement. The LEC typically installs the demarc to the MDF. An intermediate distribution frame (IDF) is a smaller wiring distribution point within a building.
Which of the following terminates individual wires from a 25 pair or 100 pair cable using female RJ45 ports?
Which of the following is used to terminate individual wires from a 25 pair or 100 pair cable using female RJ45? 110 block, Horizontal cross connect, Patch panel, 66 block.
Is the demarc inside or outside a building?
The demarc is typically located in the bottom floor of a building, just inside the building. For residential service, the demarc is often a small box on the outside of the house.
Which of the following methods would you use to create a crossover cable correct answer?
Which of the following methods would you use to create a crossover cable? Use the T568A standard on one connector and the T568B on the other connector. You need to terminate a Cat 6 UTP cable with an RJ45 connector.
Why might you use an RJ11 connector?
Why might you use an RJ11 connector? You want to connect your computer to the internet with a DSL modem. RJ11 connectors are typically used for telephones and modems.
Is Ethernet twisted pair?
Twisted pair Ethernet is an Ethernet computer network that uses twisted pairs of insulated copper wires for the physical layer of the network, which is combined with the data link layer. Typically, twisted pair has less bandwidth than other Ethernet standards such as optical fiber and coaxial cable.
Which of the following are characteristics of an LC fiber optic connector?
Which of the following are characteristics of an LC fiber optic connector? (Choose two.) They are half the size of standard connectors. They use a housing and latch system similar to an RJ45 UTP connector. LC fiber optic connectors are small, about half the size of other fiber optic connectors.
Which of the following standards is typically used in a rollover cable?
Which of the following standards is typically used in a rollover cable? RS232 is the standard for serial communications.
Which of the following devices operates at OSI Layer 2?
Which of the following devices operates at the OSI model Layer 2? A switch operates at the OSI model Layer 2 (Data Link layer).
ncG1vNJzZmivp6x7or%2FKZp2oql2esaatjZympmennbaktIyonWasmJp6p7vLpaawoZ6cerWx0aaqZqGUmru1tcWinKxlpJ2ybsPIq6Cnn12YubC%2FxK1koqZdqbWmecGaqp6llaPBbq%2FHnpqkZZmperDB02afnqqVYsSptcKhZKieXam1pnnFqKOlp6eeu6h5056ppqtdnrGmutOinaKdo2LBqbGMsKCroZ6ceqS4zqycrWWZo3q1tMRmmZqrlaKyr8CMqKlmmV2cv7DBzZ1kn6SfpL9uwMeaq2asqaW2pK3LpWY%3D