065″ Copolymer Nylon – Replacement String Trimmer Line.

Who builds hyper tough weed eaters?

ALM Manufacturing – Hyper Tough grass trimmers.

How do you remove a hyper tough trimmer head?

Pull the trimmer line spool out of the trimmer head. Observe your trimmer head to see if it has a small hole in the inner and outer portions. If so, insert a small Phillips screwdriver into the two holes to hold it in position, remove the center nut with an adjustable wrench and pull the head off.

What type of fuel does a hyper tough weed eater use?

All Weed Eater brand two-cycle gas trimmers use a 40:1 ratio of gas to oil. That’s equal to 3.2 ounces of oil to 1 gallon of regular gas. The gas should be 87 octane with no more than 10 percent alcohol.

Who makes hyper tough H2500?

Hyper Tough by MTD Gas String Trimmer. Model: H2500 41CDZ01C735.

Which way do I wind weed eater string?

Tip. Wind string trimmer spools in the direction of the arrow on the spool. If there’s no arrow, wind in the direction opposite to the rotation of the trimmer head.

Can I use SAE 30 in my Weed Eater?

Any two-stroke motor oil made for air-cooled engines, such those in chainsaws, water pumps and weed eaters, will work perfectly in your two-stroke lawn mower engine. SAE 30 Oil: Engine oil best suited for warmer temperatures.

How do you mix 50 to 1 gas Weed Eater?

If you are mixing a 40:1 gas-to-oil ratio, mix 3.2 U.S. ounces of oil for every 1 gallon of gas you need. If you are mixing a 50:1 gas-to-oil ratio, mix 2.6 U.S. ounces of oil for every gallon of gas you need.

ncG1vNJzZmivp6x7or%2FKZp2oql2esaatjZympmeYrr2mvoytpq6fmGLEprHDZpyarJWnerTA0aKloGWjnsemecKhnJyjXZ7BbrvUrWShnaKaeri0zmaZrqGcmcButNipnKtlpKTCqLSMsJyenF2arrWx0axm