To unlock the controls, press and hold the CYCLE END SIGNAL for 3 deliberate seconds or until the control lock light goes out. If the control locked light will not turn off, I recommend unplugging the washer for 5 minutes. Plug the unit back in and see if the controls will respond.

How do I unlock my Maytag control panel?

Press and hold the designated control lock button for your model for 3 seconds. The location of the control lock button may vary depending on your model. Refer to the Owner’s Manual for the control lock button location for your model. The light will turn off and the control will be unlocked.

Why does my Maytag washer say control locked?

When the control is locked, the cycles cannot be started or changed. It must be unlocked to operate or run a cycle. The Control Lock can also be set while the machine is running to prevent someone from stopping or changing a cycle.

How do I reset my Maytag washer lock?

Door Locked at the end of the Cycle

If the washer will not unlock at the end of a wash cycle, unplug the washer or disconnect power. Wait approximately 2 minutes for control to reset. Reconnect power to washer (plug in). Run a “Drain and Spin” cycle.

How do I unlock my Maytag washer?

If you remove the top washer panel, you can reach down into the washer and pull the tear shaped tab at the bottom of the door lock and it will unlock the door. On some of the Maytag washing machine models, there is a green plastic rope/string located near the detergent area that if pulled, will unlock the door.

How do you reset the control lock on a Maytag dishwasher?

To turn off Control Lock, press and hold the button(s) designated for your model for 3 seconds. This will vary depending on your model number. Once held for 3 seconds, the lock indicator light will turn off.

How do I turn off the Control Lock on my Maytag?

To turn off Control Lock, press and hold the Options key that says “Control Lock Hold 3 Sec” under it for 3 seconds. If the dishwasher has a dedicated Control Lock button in the Options selections, press and hold CONTROL LOCK for 3 seconds (press the words “Control Lock).

ncG1vNJzZmivp6x7or%2FKZp2oql2esaatjZympmedlsa1rcZmrpqrmJq%2Fbq%2FOp6urp5xiubCvymaaoZ2ToHqqwIyorK1lmJq%2FpnnHqK5mnJ9itm7BzaWmnKNdosZuucCyq5qfXZi8r8DRqKNmqJGjsq17