“E-9” in the display means the battery is almost out of power. Change the battery now. If the message reappears after the battery has been replaced, reset the meter. To reset the meter, remove the battery, press any meter button, then reinsert the battery.
How do I fix my Accu-Chek error?
Turn the meter off and on or take the battery out for 20 seconds and reinsert it. Perform a blood glucose or control test. If the problem persists, please contact Accu-Chek Customer Care.
How do I reset my Accu-Chek?
Perform a meter reset by doing the following:
Remove the batteries.Press and hold the Power/Set/OK button for at least 2 seconds.Reinsert the batteries.
Why does Accu-Chek show E 1?
“E-1” in the display means the test strip may be damaged or the code key is incorrect. Remove and reinsert the test strip. If the message reappears, turn off the meter and make sure the code key is properly inserted. If the message reappears, please contact Accu-Chek Customer Care.
What is the normal fasting sugar level?
Fasting Blood Sugar Test
This measures your blood sugar after an overnight fast (not eating). A fasting blood sugar level of 99 mg/dL or lower is normal, 100 to 125 mg/dL indicates you have prediabetes, and 126 mg/dL or higher indicates you have diabetes.
What is E 4 on Accu-Chek?
E – 2 Incorrect code chip Turn off the meter and insert the correct chip. E – 3 Test error Discard the test strip and repeat the test. E – 4. Insufficient blood (or QC. control) Discard the test strip and repeat the test.
Why is my glucometer showing error?
Error codes may typically appear for reasons including: Blood test sample smeared or not large enough. Test strip incorrectly inserted. Wrong test strip used.
Do Accu-Chek test strips expire?
Using test strips that have expired can cause your results to be inaccurate. If your test strips have expired, throw them away and begin using a new vial of strips. The expiration date is printed on every vial of test strips.
What is code key in glucometer?
These meters come precoded with a black code key that remains in place for the life of the meter. There’s no need to manually code the meter. If you do not have a black code key, please contact Accu-Chek Customer Care.
How do you clear the memory on Accu-Chek Active?
With the Accu‑Chek Instant S meter, it is not necessary to delete stored results. Once 720 blood glucose results are in the memory; adding a new result causes the oldest one to be deleted.
How do I reset my glucometer?
Press and hold the M (Memory) button for 7 seconds to restore the glucometer’s factory settings. Restoring factory settings: Restores the date by default (01/01/2017). Remember to reconnect the glucometer before taking new offline measurements.
What does e3 mean on Accu-Chek?
“E-3” in the display means your blood glucose may be extremely high or a meter or a test strip error has occurred. The following instructions should help you understand what action to take: If your test result matches how you feel, contact your healthcare professional immediately.
What is E 5 in Accu-Chek?
“E-5” in the display means the code key is incorrect or your test strips have expired. Make sure the time and date in the meter are correct. If the problem persists, please contact Accu-Chek Customer Care.
What does PC mean on Accu-Chek?
Micro USB Port Transfers data from the meter to a computer (PC). The Accu-Chek Instant S Meter.
Is 200 blood sugar normal after eating?
Results are interpreted as follows: Less than 140 mg/dL (7.8 mmol/L) is normal. 140 to 199 mg/dL (7.8 mmol/L and 11.0 mmol/L) is diagnosed as prediabetes. 200 mg/dL (11.1 mmol/L) or higher after two hours suggests diabetes.
Is fasting blood sugar 119 high?
Low blood sugar or hypoglycemia is when blood levels drop below 70 mg/dL in diabetics or around 55 mg/dL (3 mmol/L) in healthy people. High blood sugar or hyperglycemia is when your blood glucose levels are too high, above 126 mg/dL or 7 mmol/L. The normal fasting blood sugar range in healthy people is 70 – 125 mg/dL.
Can I drink water before fasting blood sugar test?
For a fasting blood glucose test, you can’t eat or drink anything but water for eight hours before your test. You may want to schedule a fasting glucose test first thing in the morning so you don’t have to fast during the day. You may eat and drink before a random glucose test.
ncG1vNJzZmivp6x7or%2FKZp2oql2esaatjZympmeVbnqir8KuZJyglaB6pLTEnKJmoaRivLbAjKGcq51drLWiwIydpp6rXZqGbrnEmqVmp55iurp5wJyarmWTnbKsew%3D%3D