In a 5W20 engine. You could use a 0W20 oil (I use 0W20 oil) in cold weather and it would be Ok by Ford. (they will not say it is good, but they will still honor the warranty..) But 10W40 is way off, and I bet they would be not so happy over any engine problems if they found 10W40 in a failed engine.

Is 10W40 the same as 5W20?

So the 5W-20 indicates a thin oil that is great for cold climates, but it does becomes very thin at hotter engine temperatures. The 10W-40 indicates that the oil flows reasonably well at cold temperatures, yet does not get much thinner even when very hot.

What can I use instead of 5W-20 oil?

10w30 and 5w20 engine oils have similar SAE ratings, which means that they will perform similarly at operating or high temperatures. The number 30 indicates the viscosity of the oil at high temperatures, as stated before. 10w30 tends to get thicker in cold weather which makes 5w20 better suited for these environments.

What if I put 10W40 instead of 5w30?

If you use 10-w-40 instead of 5-w-30 specified by the manufacturer then the viscosity of 10-w-40 used by you will be higher and oil thicker than what is specified during winters. Similarly the oil viscosity will be higher and oil thicker than specified during summers.

Can I use 10W 30 instead of 5W20?

Originally Answered: Can I put 10w30 instead of 5w20? You can, but you will get worse mileage, and in most cases shorten the life of your engine, as it will take longer to pump up pressure for your bearings and lifters, and won’t spray your lower cylinders for an extra second or so on each cold start.

Can I put 5W 40 instead of 5w20?

5W20 offers better fuel economy than 5W40 and some engines are optimised for using it and lubricating some parts. If you drive short distances only and engine remains cold, then using W40 instead W20 is not an optimal choice.

What’s the difference between 5W-20 and 5W 40 oil?

5w-20 is even thinner than the 5w-40. It flows much better but is too thin to properly lubricate an engine that requires a slightly thicker, 40 grade oil.

What’s the difference between 10W 30 and 5W-20?

Main Differences Between 5w20 and 10w30

5w20 is thinner at lower temperatures, whereas 10w30 is thicker at lower temperatures. 5w20 is better for cold-weather starting, whereas 10w30 is better for sealing action. Light duty petrol and diesel engines use 5w20, whereas large weight carrying engines need 10w30.

What happens if I use 5w30 instead of 5w20?

If you mix 5w30 and 5w20, the oils will mix, but they will not blend into a single oil. So, they will stay separate and flow. Because the two oils have the same viscosity in freezing temperatures, they would both flow uniformly to the top ends.

What is the difference between 10w30 and 10W40 oil?

The higher the number, the more viscous or thicker, the oil is at higher temperatures. 10W40 oil has a higher viscosity, retaining more thickness than 10W30 as the temperature rises. In that case, 10W-40 motor oil would technically provide better protection against engine wear contact in higher temperatures.

What oil is thicker than 5w20?

The motor oil is categorized according to its viscosity. Whether the oil is thicker or extra thinner, it specifies the type of engine it is suitable for. There are hundreds of oils but 10w30 and 5w20 are the most common of all. The 10w30 type is the thicker one and 5w20 is the thinner.

Can you mix 10W40 and 5W-30?

No, especially if it’s a different manufacturer. The additives could react with each other. At least you should use the same brand, but 10w40 is a bad oil, and if the engine requires 5w30, the 10w40 is too thick.

Can I use 5W 40 instead of 5W-30?

There’s not going to be much functional difference between a 5w-30 and 5w-40 as there’s a lot of functional overlap in the recommendations. The lower weight might yield better efficiency under light load operating conditions, but higher weight might yield better protection under higher load operating conditions.

Can I put 10w30 in 5W-30?

Most oils will mix perfectly, provided they have a similar synthetic. Therefore, there is no problem in mixing 10w30 and 5w30 since one will be topping up. Mixing the viscosity of oils will not have any effect on the engine. 5w30 and 10w30 engine oils have close viscosity, and thus there is no harm in mixing them.

What happens if I use wrong oil in car?

Using the wrong fluid can cause poor lubrication, overheating, and possibly transmission failure. A mechanic might not be able to reverse the damage, even by flushing the transmission. Mistakenly adding motor oil or brake fluid can also destroy your transmission.

ncG1vNJzZmivp6x7or%2FKZp2oql2esaatjZympmeTlrtutYyuqp5lYWXEdXyMoqWsrJWWsW67xWZssGpgYrCpscKkZKKsXaTCtXnHnqmeZZmoenJ81m1nZqyYmnq0rcyeZJqrXWrEc3yO